Industrial
Click on photos to see larger
versions
Coeur d'Alene, ID
|
Contractors Northwest Inc. was
selected to implement several upgrades and build the
expansion for the City of Coeur d’Alene. The
expansion and renovation project includes a new
Influent Pump Station and Screening Building,
Primary Clarifier modifications and Covers, Utilidor,
Disinfection System modifications, Effluent Pumping
Station modifications, scum pumping, foul air odor
control facilities, yard piping, site work,
associated electrical and control modifications and
associated coatings. Some of the other work includes
upgrades and modifications to the Solids Building
and Centrate Pumping, existing Headwork’s,
Landscaping, additional equipment and miscellaneous
concrete repairs. |
|
Boise, ID
|
This 465,000-square foot structure
is a post-tensioned, cast-in-place concrete,
four-level parking garage with a metal building
covering the entire upper deck. This structure was
built on 62,000 cubic yards of over-excavated fill,
and required 370,000 square feet of shored concrete
deck forms, 23,000 cubic yards of concrete, 1,600
tons of rebar, and 240 tons of post-tension cables.
The building façade consists of pre-cast concrete
wall panels at each level. An elevator lobby, stair
tower, and helix ramps complete the garage. Site
amenities include new parking lot paving and
lighting, traffic control devices, landscaping, and
a sprinkler irrigation system. Construction was
completed in nine months, which included
four-and-a-half months for the concrete structure.
Contractors Northwest, Inc. self-performed 120,000
man-hours of labor on this project. |
 |
Hayden, ID
|
This design-build project is a
52,200 square foot distribution facility built for a
local distributor of Anheuser-Busch, Inc. The
building is concrete tilt-up construction that
consists of a refrigerated warehouse, office area,
meeting rooms, employee offices and work areas and a
client meeting and entertainment area. The
warehouse areas are climate controlled environments
designed to the strict requirements of
Anheuser-Busch. The concrete tilt panels were
specially designed to meet this requirement and were
fabricated on site. Each panel is a "sandwich" of
concrete and insulation with some panels weighing in
excess of 140,000 lbs. The interior offices feature
built-in custom millwork while the client
entertainment and meeting room have a custom bar and
exterior custom concrete patio that features the
Anheuser-Busch bottle cap logo cast into
the patio area. |
 |
|
