Interiors

Click on photos to see larger versions

Coeur d’Alene Airport Maintenance Hangar and Office Building

Hayden, ID

  • Owner: Panhandle Area Council

  • Architect: GD Longwell

  • Civil / Structural Engineer: JUB Engineers

This design-build project was a collaborative effort between CNI, G.D. Longwell Architects, and JUB Engineering. The Hangar facility and adjacent offices were built for the Panhandle Area Council and is currently leased to Empire Airlines. Through the use of a lightweight Vertical Lift Door System, the hangar can allow entry for up to a 737 and a smaller aircraft simultaneously. The hangar building has several skylights and windows to allow employees to work by natural light and has a maintenance friendly epoxy coated slip resistant flooring system to help promote a safe work environment.

The adjacent office building is designed to address the areas vernacular style by the use of heavy timbers, stone, multiple roof dormers, and other feature elements. The office area is set up to use open plan systems furniture and emphasizes the use of natural light and ease of interior circulation.

Coeur d'Alene Airport Office Building - Hayden, Idaho

Empire Airlines - Interiors - Hayden, Idaho

 

Lakewood Office Building

Coeur d'Alene, ID

  • Owner: Parkwood Business Properties, Coeur d'Alene, ID

  • Architect: GD Longwell,
    Coeur d'Alene, ID

This project which began during the summer of 1993, started as a speculative building shell with finishes only in the common areas. Ultimately the entire build-out was completed as tenants came on board. There is a partial lower level, which is 11,000 square feet, and an upper level which is 9,000 square feet. There is a 3,800 square foot two-story courtyard complete with a large radius glass wall facing the river, a reflecting pond, a glass-sided elevator, and a large glass roof structure. The exterior is finished with brick veneer, reflective glass, and concrete tile roofing. Lakewood Office Building - Coeur d'Alene, Idaho

Lakewood Office Building - Coeur d'Alene, Idaho

Whiteman Industries

Boise, ID

  • Owner: Parkwood Business Properties, Coeur d'Alene, ID

  • Architect: GD Longwell,
    Coeur d'Alene, ID

This project is a new 132,114 square foot manufacturing facility located in Boise, Idaho. Contractors Northwest, Inc. self performed the concrete work while the rest was performed by subcontractors. The concrete work consisted of concrete tilt-up panels, footings, foundations, slab on grade, site concrete, and other miscellaneous concrete. In total, 5,351 cubic yards of concrete was installed along with 135,400 pounds of rebar.

The interior was also built out by CNI and includes stained concrete floors, granite wall panels, stained intricate millwork and exposed interior aggregate wall panels.

Whiteman Industries - Boise, Idaho

Whiteman Industries - Boise, Idaho

Mountain West Bank

Coeur d'Alene, ID

  • Owner: Mountain West Bank
    Coeur d'Alene, ID

  • Architect: ALSC Architects
    Spokane, WA

This project was a ground up banking center for Mountain West Bank. With a half basement for storage and offices and banking facilities on the ground level, this 5,500 square foot project was started in September of 2005 and completed at the end of March of 2006. The contemporary interior features a open floor plan with innovative free standing, custom millwork “banking pods”, private offices, a fireplace, employee lounge and drive through service. Mountain West Bank, Coeur d'Alene